To create names or words that contain two adjacent letters that appear on the same button, for
example, the word press, you can do the following:
1. To enter the first character, press the dialpad key 6.
2. Pause briefly.
3. To enter the next letter, press the dialpad key 6 twice to cycle to the letter r.
When entering alphanumeric information, the 1 key on the dialpad represents the characters in the
table below. To enter a special character, press the dialpad number 1 to cycle through the
characters until you reach the one you need. For example, to enter a question mark (?), press the
number 1 key eight times.
Table 6: Alphanumeric characters for dialpad key 1
Character Name
@ at
. period
- dash
_ underscore
& ampersand
' apostrophe
^ carat
? question mark
! exclamation point
( left parentheses
) right parentheses
, comma
\ backslash
/ forward slash
: colon
; semi-colon
~ tilde
= equal
+ plus
1 numeral 1
Note:
No letters are associated with the 0 key; however, double-pressing it inserts a blank character (a
space).
Enabling and disabling the # Ends Dialing feature
You can enable the IP Deskphone to use the octothorpe (#) symbol to immediately dial the address
or phone number.
Installing the 1140E IP Deskphone
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 54
Comments on this document? infodev@avaya.com
To Next Page
Loading...
