Note:
When you enter the Auto back-out menu, the current configuration for the Menu Auto back-out
time is pre-selected (highlighted) on the list.
When you press the Select context-sensitive soft key, the time interval is flagged to commit to the
configured preferences (done after the idle screen is displayed), and is used for menu auto back-
outs from that point forward.
Selecting a ring pattern
You can use the ring pattern feature to select the ring pattern for an incoming call.
To select the ring pattern for an incoming call:
1. Press the Prefs context-sensitive soft key, select Audio, select
Tones, and then select Ring Pattern.
2. Press the Up/Down navigation key to scroll through and highlight
the different ring patterns displayed on the LCD screen.
3. Choose one of the following:
• Press the Select context-sensitive soft key to configure the ring
pattern and return to the Tones menu.
• Press the Test context-sensitive soft key to briefly play the
selected ring pattern.
• Press the Back context-sensitive soft key to keep the existing
configurations and return to the previous menu.
Configuring the Avaya 1140E IP Deskphone
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 62
Comments on this document? infodev@avaya.com
To Next Page
Loading...
