Example Description
*6[179#] Matches *61, *67, *69, or *6#
x{10} Matches ten digits
011x{7,15} Matches 011 followed by seven to fifteen digits
91(x{10}) Matches 91 followed by ten digits
• (x{10}) specifies the back reference variable, so $$ collects
only ten digits (does not include the 91)
• Example:
911234567890 is dialed
$$=1234567890
(91x{10}) Matches 91 followed by ten digits
• (91x{10}) specifies the back reference variable, so $$ collects
all twelve digits
• Example:
911234567890 is dialed
$$=911234567890
Downloadable WAV files
It is possible to customize the ring tones on the IP Deskphone. Up to five special ring tones can be
downloaded from the provisioning server and stored on the IP Deskphone. The end user can select
which ring tone they would like to implement.
In order to download these special files, the files must reside on the provisioning server and be
specified in the SIP provisioning file. For more information, see Download the SIP software on
page 46. The WAV files have a maximum size of 512 KB each for the IP Deskphone.
The file format is restricted to ITU-T A-law or u-law (8.0 kHz, 8-bit, mono or 16.0 kHz, 16 bit mono).
After the WAV files are downloaded to the IP Deskphone, the WAV file names appear in Pref >
Audio > Tones > Ring Pattern (1 to 8 are standard ring tones, and 9 and above are WAV ring
tones) and the WAV ring tones can then be selected to replace the standard ring tones.
For further information about downloadable WAV files, see the applicable IP Deskphone User
Guide.
Downloadable WAV files
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 101
Comments? infodev@avaya.com
To Next Page
Loading...
