Chapter 9: Install the SIP software
This chapter provides information on installing SIP software on a new 1200 Series IP Deskphone
(1220 IP Deskphone and 1230 IP Deskphone). If the IP Deskphone already has SIP software
installed, see Upgrade the SIP Software on the IP Deskphone on page 122. If the IP Deskphone
has UNIStim software installed, see Convert UNIStim software to SIP software on the
IP Deskphone on page 127.
The 1200 Series IP Deskphones are shipped from the factory with only boot loader software.
The boot loader software is designed to work with DHCP and Option 66 to automatically obtain its IP
information and the provisioning server IP address, and to read the 12xxBoot.cfg file from the
provisioning server. Based on the information in the 12xxBoot.cfg file, the IP Deskphone downloads
and installs a specific SIP software load.
The IP Deskphone reads and acts on the instructions in the 12xxBoot.cfg file.
You must create the 12xxBoot.cfg file as a standard text file, using the format described in Boot
loader file format on page 117, and place the file on the root directory of your provisioning server.
Related Links
Boot loader file format on page 117
Downloading the 12xxBoot.cfg file on page 118
Boot loader file format
The 12xxBoot.cfg file has the following options and configurations:
Field name Field value Description
[FW] Section header for software download
information.
DOWNLOAD_MODE AUTO The software is always downloaded; this
field is ignored.
VERSION SIP12x004.04.09.00 The version of the software.
This field is ignored.
FILENAME SIP12x004.04.09.00.bin Image file name.
Table continues…
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 117
Comments? infodev@avaya.com
To Next Page
Loading...
