6. From the search results, select the desired release of the SIP Software for the
IP Deskphone.
A new window opens.
7. Scroll down the page and click the desired version of software; for example,
SIP12x004.03.12.00.bin.
The File Download window opens.
8. Click Save.
The Save As window opens.
9. Select the location to save the file and click Save.
10. After the file has downloaded, place the file in the correct directory on the provisioning
server.
Modify the SIP provisioning file
Use the following procedure to modify the SIP provisioning file, which exists on the provisioning
server.
Modifying the SIP provisioning file
1. Under the firmware [FW] section of the SIP Provisioning file, increase the VERSION number
(for example 06A5C39d26).
2. Under the firmware [FW] section of the SIP Provisioning file, modify the FILENAME of the
new file you want to upload to the IP Deskphone.
Important:
The VERSION number must be the same as the FILENAME (do not include the .bin
extension).
For example, if the FILENAME is SIP12xx03.00.33.04.bin, then the VERSION must be
SIP12xx03.00.33.04
3. Invoke the upgrade mechanism.
Use one of the next three methods to invoke a software upgrade on the IP Deskphone with
SIP Software.
a. Power off and power on the IP Deskphone.
b. Select Services > Check For Updates on the IP Deskphone.
c. Allow for an automatic check for updates to occur. (See AUTO_UPDATE under Feature
configuration commands on page 65).
Any of these actions causes the IP Deskphone to contact the provisioning server and
attempt to read the Provisioning file. A Soft Reset (Srvcs > System >, Reset Phone) does
not cause the IP Deskphone to retrieve the Provisioning file and therefore does not cause a
software upgrade.
Upgrade the SIP Software on the IP Deskphone
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 123
Comments? infodev@avaya.com
To Next Page
Loading...
