Upgrade to the minimum UNIStim Software
. You can convert the software on a 1200 Series IP Deskphone from UNIStim to SIP. To
successfully convert the software from UNIStim to SIP, the UNIStim software version on your IP
Deskphone must be 062AC5L or higher.
Identify the current version of UNIStim software
Use the following procedure to determine the version number of UNIStim software on an
IP Deskphone.
Checking the UNIStim software version on an IP Deskphone
1. Press the Globe/Services key on the IP Deskphone twice quickly.
If the admin password prompt appears, enter the password 26567*738.
The Local Tools menu appears:
Table 11: Local Tools menu
1. Preferences
2. Local Diagnostics
3. Network Configuration
4. Lock Menu
To make a selection, press the number associated with the menu item, or use the
Navigation key cluster
to scroll through the menu items. Press the Select key to select the highlighted menu item.
Table 12: Using the Navigation key cluster to navigate in the Local Tools menu
Key
Action
Down Moves highlight down
Up Moves highlight up
Right Selected current menu item
Left Closes menu
Select key (center of cluster) Selects current menu item
To close this menu, use the Quit key.
2. Select 2. Local Diagnostics in the Local Tools menu by pressing the Select key in the
Navigation key cluster or by pressing the number 2.
Upgrade and convert the IP Deskphone software
124 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
