Provisioning IP Deskphone parameters
By default, the IP Deskphone can automatically provision most parameters. However, you can
manually provision parameters. The Auto Provisioning page provides the selection to manually
override the parameter. Use the Device Settings menu item to configure IP Deskphone
parameters. Double-press the Globe key to open the Network menu and press 2 on the dial pad to
open the Device Settings menu.
The Configuration page appears when you select the Device Settings menu item. Any automatic
provisioned parameters appear dimmed.
The Device Settings menu shows the configuration parameters that are configured as Manual on
the Auto Provisioning page. Use the Up and Down navigation keys to scroll through the main
configuration options and the Right or Left navigation keys to scroll through the sub configuration
options.
For all supported IP Deskphones, you can press the Auto soft key to switch to the Auto
Provisioning page to define parameters that you can obtain automatically or manually. Then from
the Auto Provisioning page, you can press the Cfg soft key to switch to the Device Settings option.
Configuring parameters manually for the IP Deskphone
Procedure
1. Press Auto on the Configuration page to switch to the Auto Provisioning page.
2. Perform one of the following actions:
• Press the AllMan soft key to change all parameters to be manually provisioned.
• Use the dial pad to enter the number associated with the parameter, or use the navigation
keys to scroll and highlight the specific parameter (up/down navigation takes you from
Provisioning IP Deskphone parameters
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 131
Comments? infodev@avaya.com
To Next Page
Loading...
