group to group, while left/right navigation takes you from item to item). Press the Enter
key to uncheck the parameter, making it "Manual" provisioned.
3. To exit and save, press the Config key to return to the Device Settings page, then press
Apply.
Configuring parameters automatically for the IP
Deskphone
About this task
Perform the following procedures to configure all parameters or specific parameters using automatic
provisioning.
Procedure
1. Press Auto on the Configuration page to switch to the Auto Provisioning page.
2. Perform one of the following actions:
• Press the AllMan soft key to change all parameters to be auto-provisioned.
• Use the dial pad to enter the number associated with the parameter, or use the navigation
keys to scroll and highlight the specific parameter (up/down navigation takes you from
group to group, while left/right navigation takes you from item to item). Press the Enter
key to check the parameter, making it "Auto" provisioned.
3. To exit and save, press the Config key to return to the Device Settings page, then press
Apply.
Auto Provisioning parameters
Use the keys in the following table to provision the parameters for the IP Deskphones.
Table 16: Keys and descriptions
Key
Description
[ ] Check box, select or clear: Auto-checked, Manual-
unchecked.
Dial pad Enter number of index to jump to option
Up Move up a group index
Down Move down a group index
Right Go to next item.
Table continues…
Provisioning the IP Deskphone Device Settings
132 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
