Avaya 1230 - Manual Provisioning Parameters

Sip TCP Port
Sip TLS Port
20. Keep Alive Type
Connection Keep Alive
21. Register Retry Time
Register Retry Max Time
22. Login Notify
Login Notify With Time
23. IPv6 Enable
24. FIPS Enable
Manual provisioning parameters
Use the Device Settings menu to manually provision the IP Deskphones. Double-press the Services
key. You can press the number associated with the menu item or you can use the navigation keys to
scroll through the list of items.
Use the keys in the following table to provision the parameters for the IP Deskphones.
Table 17: Keys and descriptions
Key Description
Up Main dialog: Scroll dialog up (highlight does not
move) In list: move highlight up an item.
Down Main dialog: Scroll dialog down (highlight does not
move) In list: move highlight down an item
Right Move highlight down an item In list: close list
Left Move highlight up an item
Enter Highlight on list item: open list In list: select
highlighted item and close list Highlight on editable
item: start edit mode Highlight on checkbox item:
toggle checkbox state
Apply Save changes and reboot IP Deskphone.
Auto Go to Auto provision page.
Config Return to manual configuration page.
AllMan / AllAut Context-sensitive. Set all items to manual (clear
checkboxes) or auto (check all boxes).
Cancel Exit Device Settings without saving changes.
In edit mode
Up Scroll dialog up (highlight does not move).
DownScroll dialog down (highlight does not move) Exits Edit mode, moves highlight up an item.
Left Moves edit cursor to the left.
Right Moves edit cursor to the right.
Table continues…
Provisioning the IP Deskphone Device Settings
134 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com