Avaya 1230 - Configure the Device Settings

Configure the device settings
This section describes how to provision the Device Settings parameters regardless of DHCP mode
(Yes or No DHCP). Parameters that are not needed in Yes DHCP mode are grayed out on the
IP Deskphone screen and cannot be modified.
Perform the following procedure to provision theDevice Settings parameters on the IP Deskphone
with SIP Software.
Provisioning the Device Settings parameters
1. Press the Globe/Services key on the IP Deskphone quickly twice. The Network menu
appears:
Table 25: Network menu
1. Server Settings
2. Device Settings
3. Diagnostics
4. Lock
2. To navigate in the Network menu, use the Navigation key cluster:
Table 26: Using the Navigation key cluster to navigate in the Network menu
Key
Action
Down Moves highlight down
Up Moves highlight up
Right Selected current menu item
Left Closes menu
Select key (center of cluster) Selects current menu item
Menu items can also be accessed through the IP Deskphone keypad. Press the number (1
to 4) corresponding to a menu item to highlight that menu item. Press the Select key to
select the highlighted menu item.
To close this menu, use the Quit key.
3. In the Network, choose 2. Device Settings.
4. Enter the admin password. Press the OK context-sensitive soft key.
5. Use the Navigation key cluster to edit an item:
Table 27: Using the Navigation key cluster to navigate in the Device Settings menu
Key
Action
Down Opens list or moves highlight down list.
Table continues…
Device Settings on the IP Deskphone with SIP Software
160 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com