Key Action
Up Moves highlight up list.
Right Selects the next item or moves the cursor right in
an edit item.
Left Selects the previous item or deletes a character in
the edit field.
Select key (center of cluster) Selects the highlighted item in the combo box or
ends edit mode.
In Edit mode, the first field of the item is highlighted.
Press the Apply&Reset context-sensitive soft key to save settings in the Device Settings
menu after all the necessary changes are made. This action resets the IP Deskphone.
Press the Return context-sensitive soft key to exit the Device Settings menu without saving
any changes.
6. Navigate to the first item in the Device Settings menu to configure EAP.
Table 28: EAP configuration
Enable 802.1x (EAP): □
Device ID:
Password:
A check mark appears in the check box if the item is active.
7. If the Enable 802.1x (EAP) check box is checked, fill in the Device ID and the Password.
8. Configure 802.1ab Link Layer Discovery Protocol Data (LLDP) in the Enable 802.1ab (LLDP)
menu.
Use the right arrow in the Navigation key cluster to highlight the Enable 802.1ab (LLDP) box.
A check mark appears in the check box if the item is active.
Table 29: 802.1ab configuration
Enable 802.1ab (LLDP): □
9. Configure DHCP in the Device Settings menu.
Use the right arrow in the Navigation key cluster to highlight the DHCP box. Press the Select
key to access a list of DHCP mode choices:
• Yes
• No
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select No.
Configure the device settings
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 161
Comments? infodev@avaya.com
To Next Page
Loading...
