Avaya 1230 - Line Keys

reconnected, the IP Deskphone proceeds to reregister all accounts, starting with the primary
account.
Line keys
Each registered user is associated to a separate line key. Each line key displays the name of the
registered account and some basic state information for the account.
The primary account is associated to the first bottom-right line key of the IP Deskphone. If you are
using a secondary account, the order of the next available line key is from bottom to top and right to
left on the IP Deskphone, followed by the keys on the Expansion Module from bottom to top and
right to left. You can select a different available line key for secondary accounts during the logon
process.
The following figure is an example of the IP Deskphone with and Expansion Module and multiple
accounts.
Figure 13: IP Deskphone with Expansion Module and multiple accounts
Pressing a line key brings up a dialing prompt, initiates a call to a preselected target, or answers an
incoming call. See Making a call on page 180.
At select account prompts, such as the Logout screen or User Settings screen, pressing a line key
highlights the corresponding account. See Account selection on page 188.
The icon for each line key reflects the state of the account associated with that line key.
• If there is a call for the account, a IP Deskphone icon displays the state of the call, such as
when the call is on hold or is ringing.
• If there is more than one call, the state of the most active call is displayed.
Line keys
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 179
Comments? infodev@avaya.com