Avaya 1230 - Speed Dial List

The following configuration flag is used for enabling or disabling the customized login banner.
LOGIN_BANNER_ENABLE Y/N (Default: N)
The banner text is defined in a separate text file that is linked from the original configuration file.
The banner text file is a separate file downloaded by provisioning. The banner text file is specified
much like the current dialing plan is specified (file name listed in 12xxSIP.cfg, under section
[LOGIN_BANNER]), and is downloaded when enabled or disabled.
To be accepted, the file must contain at least one byte and must be no larger than 2048 bytes. The
encoding of the file must be UTF-8, or compatible with UTF-8, to ensure that all the characters are
displayed properly.
Speed Dial List
When configured by provisioning, a feature key can be used as a "Speed Dial List". The feature key
and the contents of the Speed Dial List must be specified by the provisioning mechanism. The user
cannot modify or delete the feature key used by the Speed Dial List and cannot modify the content
of the Speed Dial List.
Invocation of the Speed Dial List is similar to any other feature key invocation. The Speed Dial List
key causes a full screen list to appear on the IP Deskphone and the user can automatically dial one
of the offered choices.
The contents of the Speed Dial List can vary (context-sensitive) based on the current call state of
the IP Deskphone and the type of Speed Dial List entry configured. Only entries in the Speed Dial
List can be context-sensitive; not all speed dial keys or individual features keys are context-
sensitive.
A Speed Dial key, or one included in a Speed Dial List, can cause any call that it placed on hold
(when invoked) to be unheld automatically when the call completes, based on a new value that must
be configured when a Speed Dial key is created or configured.
Administration and use of the Speed Dial List feature
Provisioning the device configuration provides the IP Deskphone with the following features:
• Index of key to use as Speed Dial List. You can use the following flag to disable the Speed Dial
List feature by configuring the key index to less than two (2).
SPEEDLIST_KEY_INDEX <key index>
• Label to use for the Speed Dial List key.
SPEEDLIST_LABEL <text>
The IP Deskphone retrieves the device configuration through provisioning, and if the
SPEEDLIST_KEY_INDEX flag is configured to a valid programmable key that can be used for the
Features
192 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com