SERVER_IP5_2 SERVER_PORT5_1 MAX_ADHOC_PORTS5
SERVER_PORT1_1 SERVER_TCP_PORT5_1 DNS_DOMAIN
SERVER_TCP_PORT1_1 SERVER_TLS_PORT5_1 DHCP_ENABLE
SERVER_TLS_PORT1_1 SERVER_PORT5_2 ENABLE_USB_PORT
SERVER_PORT1_2 SERVER_TCP_PORT5_2 USB_HEADSET
SERVER_TCP_PORT1_2 SERVER_TLS_PORT5_2 ENABLE_BT
SERVER_TLS_PORT1_2 AUTOLOGIN_ID_KEYxx PCPORT_ENABLE
SERVER_PORT2_1 AUTOLOGIN_AUTHID_KEYxx EAP
SERVER_TCP_PORT2_1 AUTOLOGIN_PASSWD_KEYxx EAPID1
SERVER_TLS_PORT2_1 AUTOLOGIN_ENABLE EAPID2
SERVER_PORT2_2 LLDP_ENABLE EAPPWD
All Server Profile files are uploaded to the IP Deskphone through the standard upgrade mechanism.
When switching from one server to another server, the IP Deskphone applies the configuration
parameters for the appropriate server.
The Server Profile option is implemented using the following command parameters:
• PRIMARY_SERVER_PROFILE <filename>
• SECONDARY_SERVER_PROFILE <filename>
The commands are processed as follows:
1. If the x_SERVER_PROFILE command is specified and contains the x Server Profile
<filename>, the Server Profile file is downloaded to the IP Deskphone during the standard
upgrade mechanism after downloading the System Configuration file.
If the Server Profile file is specified but cannot be downloaded, the IP Deskphone uses the
old Server Profile file, if it exists in the Flash File System (FFS). If there is no old Server
Profile file, the IP Deskphone applies the parameters from the System Configuration file by
default.
For example: PRIMARY_SERVER_PROFILE profile01.dat — applies values from the
profile01.dat file for the Primary server
2. If the x_SERVER_PROFILE command is specified, but the parameter is absent, the IP
Deskphone applies the parameters from the System Configuration file by default for this
server. The old Server Profile file is removed from the FFS.
For example: PRIMARY_SERVER_PROFILE <blank> — uses configuration parameters
taken from the System Configuration file and removes the old Server Profile file designated
for the Primary Server
3. If the „x_SERVER_PROFILE’ command is not specified or is skipped, the IP Deskphone
applies the configuration values obtained from the old Server Profile file, if it exists.
Otherwise, the configuration values are taken from the System Configuration file by default.
Features
208 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
