KEY_ALGORITHM = KEY_ALG_RSA
TLS_CIPHER = RSA_WITH_AES_256_CBC_SHA
SUBJ_ALT_NAME_CHECK_ENABLE = NO
FTP_PASSWORD = ****
Certificate Admin option in the user interface
The following procedure provides the steps to view the Certificate Admin option in the user
interface.
Viewing the Certificate Admin option in the user interface
1. Create a text file; for example, SecurityPolicy.txt.
2. Add CERT_ADMIN_UI_ENABLE YES in the text file.
3. Sign the file using a signing certificate. For example, SecurityPolicy.txt.sig file is created.
4. Download the file using the [SEC_POLICY] section in the 12xxSIP.cfg file. An example of the
SEC_POLICY section is as follows:
[SEC_POLICY]
DOWNLOAD_MODE FORCED
PROTCOL HTTP
Installation
This section describes the following:
• Device certificate installation using PKCS#12
• CTL download
Device Certificate Installation
SCEP and PKCS#12 are two methods used to install device certificates. If SCEP is used to install
device certificates, see SCEP on page 252 for more information.
The following describes the process of using PKCS#12 to install device certificates.
1. The administrator adds a [DEV_CERT] section to 12xxSIP.cfg to let the IP Deskphone
import a PKCS#12 file. The following is an example of the format of the [DEV_CERT]
section:
Certificate-based authentication
274 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
