Figure 45: Example of [DEV_CERT] section
• The "*" pointed by the FILENAME attribute is substituted with the IP Deskphone MAC address
before the IP Deskphone requests the PKCS#12 file. If the IP Deskphone has multiple
PKCS#12 files, the administrator must add another ID beside "*". This ID can be the profile
index.
• The VERSION attribute determines if the file should be downloaded by comparing this
VERSION with the VERSION stored in the corresponding device certificate profile.
• The PROFILE attribute points to the device certificate profile index. The certificate profile index
identifies the file name where the profile is stored in the IP Deskphone memory (SFS), and
identifies the device certificate profile.
• The PURPOSE attribute identifies device certificate usage. The purpose attribute is a bit mask
that lets a device certificate be used for multiple purposes; for example, sharing of device
certificates. These purposes can be:
- EAP-TLS
- SIP-TLS
- HTTPS (optional)
CTL download
The [CTL] section is added to 12xxSIP.cfg to allow the IP Deskphone to download a CTL file from a
provisioning server. The following is an example of the format for the [CTL] section:
[CTL]
DOWNLOAD_MODE AUTO
PROTOCOL HTTPS
FILENAME ctl.pem
CTL download
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 277
Comments? infodev@avaya.com
To Next Page
Loading...
