Revision history
March 2015 Standard 06.04. This document is up-issued for the following
changes:
• Add SURV_SIP_SVR_ENABLE and TCP_SIP_PING_FAILBACK to
the list of server and network configuration commands.
• Add definitions for the SURV_SIP_SVR_ENABLE,
BLIND_TRANSFER_EARLY_RELEASE, DST_START,
DST_STOP, and TCP_SIP_PING_FAILBACK server and network
configuration commands.
• Add CALL_ORIGIN_BUSY,
BLIND_TRANSFER_EARLY_RELEASE, DST_START,
DST_STOP, LINE_KEY_SCROLLING, and
USE_CONTACT_IN_REFERTO to the list of feature configuration
commands.
• Add definitions for the LINE_KEY_SCROLLING, and
USE_CONTACT_IN_REFERTO feature configuration commands.
• Update definitions for the DST_ENABLED and
TIMEZONE_OFFSET feature configuration commands.
January 2015 Standard 06.03. This document is up-issued to add the following
items:
• Change the definition and default setting of the MAX_RING_TIME
option.
July 2014 Standard 06.02. This document is up-issued to add updated
information to the FAST_EARLY_MEDIA_ENABLE option.
November 2013 Standard 06.01. This document is up-issued to support SIP Software
Release 4.4.
September 2013 Standard 05.02. This document is up-issued to reflect changes in
technical content for the DEF_AUDIO_QUALITY parameter and a
note has been added to Codecs preferences on the IP Deskphone on
page 242.
June 2013 Standard 05.01. This document is up-issued to support SIP Software
Release 4.3 Service Pack 2 (SP2).
April 2013 Standard 04.05. This document is up-issued to reflect changes in
technical content in the section "IP Deskphone bug logging/recovery
commands".
November 2012 Standard 04.04. This document is up-issued to remove references to
Broadsoft content,
April 2012 Standard 04.03. This document is up-issued for changes to the
Multiuser and Multiple Appearance Directory Number sections, the IP
Deskphone to Server Options section and the IP Deskphone Security
section.
Table continues…
Revision history
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 29
Comments? infodev@avaya.com
To Next Page
Loading...
