Avaya 1230 - Chapter 3: Introduction to this Guide

Chapter 3: Introduction to this guide
Subject
This document describes how to install, configure, and provision the Avaya 1220 IP Deskphone and
Avaya 1230 IP Deskphone for use on a SIP network. The Avaya 1220 IP Deskphone and Avaya
1230 IP Deskphone are collectively known as Avaya 1200 Series IP Deskphones. In this document,
the Avaya 1220 IP Deskphone and Avaya 1230 IP Deskphone are referred to as IP Deskphones.
Part II
Part II of this document, Avaya Aura
®
support for 1200 Series IP Deskphones on page 368,
provides information specific to the 1200 Series IP Deskphones with SIP Software on an Avaya
Aura
®
system.
Part III
Part III of this document, provides information on how to migrate 1200 Series IP Deskphones in the
following scenarios:
•
UNIStim IP Deskphone migration from CS 1000 to Avaya Aura on page 393
• Migrating IP Deskphones with UNIStim firmware from CS 1000 to IP Office on page 402
Appendix information
The following appendices provide additional information:
•
User provisioning using System Manager 6.3 FP2 on page 408
• Quickstart - Add a 1200 Series IP Deskphone to Avaya Aura
®
on page 413
• Configuring FACs and FNEs for the IP Deskphones on Avaya Aura
®
on page 416
• Creating a speed dial list on page 420
•
Reference and additional documentation on page 423
Intended audience
This administration guide is intended for system administrators of the Avaya 1220 IP Deskphone
and Avaya 1230 IP Deskphone with a basic understanding of SIP. This guide is not intended for end
users of the Avaya 1220 IP Deskphone and Avaya 1230 IP Deskphone. Many of the tasks outlined
in the guide influence the function of the IP Phone on the network and require an understanding of
telephony and Internet Protocol (IP) networking.
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 33
Comments? infodev@avaya.com