Figure 83: Test key screen
After you activate the test mode, the key event appears on the screen:
•
Key pressing: "Test key: xx pressed"
•
Key pressing: "Test key: xx pressed"
The following table describes the function of the context-sensitive soft keys for the Test key screen.
Table 117: Context-sensitive soft keys for the Test key screen
Context-sensitive soft key
Action
Quit Dismisses the Services menu.
The following table describes the function of the Navigation key for the Test key screen.
Table 118: Navigation
Key
Action
Rls Closes the test mode and restarts the IP Deskphone.
Logging Systems
Logging Systems contains a subsystem for logging incoming and outgoing SIP packages for the
IP Deskphone to the log file in FFS. You can enable or disable the SIP logging subsystem by
selecting Yes (enable) or No (disable).
To access the Logging Systems menu, press the Services key on the IP Deskphone, and then
choose Logging Systems from the Services menu.
Logging Systems
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 349
Comments? infodev@avaya.com
To Next Page
Loading...
