Avaya 1230 - Page 355

# Command Description
19 routeshow Displays host and network routing tables and stats
20 arp Displays entries in the system ARP table
21 listcerts Lists all trusted certificates
22 printcert <index> Displays certificate details
23 sipapp <start | stop> Starts or stops the SIP application
24 sendunistim <xx xx....> Sends UNIStim message
25 rxunistim <on | off Displays UNIStim messages from the Core
26 txunistim <on | off Displays UNIStim messages to the Core from the SIP
application
27 sendevent <0xmmm <0xnnn> Simulates an UNIStim event.
28 lcdparam Sets up LCD parameters for the IP Deskphone
29 audio <hs | hd | hf | off> Loopbacks audio to handset/headset/Handsfree
30 display <on | off> Turns all LCD and LED on or off
31 keypress <on | off> Turns all key presses on or off
32 clearlog >clearlog<mngr_dest> Clears content of the specified log file. The input
parameter specifies the type of logging manager:
• 0 (default) — ECT-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>clearlog: incorrect type of manager <x>
33 removelog
>removelog<mngr_dest>
Removes the specified log file.
The input parameter specifies the type of logging
manager:
• 0 (default) — ECR-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>removelog: incorrect type of manager <x>
34 reset2factory >reset2factory Resets the IP Deskphone to the default setting. See
Activating Reset to Factory Setting using SSH_PDT on
page 329.
You can request the following commands to the support team if you have any issues:
• printSetInfo
• prtcfg
• prtlog 0
• prtlog 1
PDT commands
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 355
Comments? infodev@avaya.com