Avaya 1230 - Device Configuration File

• netinfo
• arpShow
• memShow
• routeshow
• i
The command ( i ) displays the list of tasks with TID and STATUS fields. For every task that has a
SUSPEND status in the list, enter the following commands:
ti 0x. <TID>
tt 0x <TID>
checkStack 0x <TID>
To print out a list of all supported commands and a short description of each, enter the "?" command
when the PDT prompt is displayed, as shown in this example:
PDT> ?.
Device configuration file
The following table describes the configuration commands in the device configuration file for alarms,
logs and diagnostics.
Table 122: Alarms, logs and diagnostics configuration commands
Component Flag Description
PC Port Mirroring parameter which
can be enabled and disabled in
the Advanced Diag Tools dialog.
PORT_MIRROR_ENABLE Determines whether the Port Mirror
option can be enabled/disabled or not
through the IP Deskphone Advanced
Diag Tools menu.
• If PORT_MIRROR_ENABLE is
configured as YES, The Port
Mirroring prompt in the Advanced
Diag Tools dialog is enabled, and you
can activate or deactivate the Port
Mirror option.
• If PORT_MIRROR_ENABLE is
configured as NO, the Port Mirroring
prompt in the Advanced Diag Tools
dialog is disabled (dimmed); the
option is deactivated by force, and
you cannot access the Port Mirror
option.
Table continues…
Diagnostics and troubleshooting
356 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com