Configuration
To enable support for PPM, configure the following parameter in the device configuration file :
ENABLE_SERVICE_PACKAGE PPM
Related Links
Personal Profile Manager support on page 25
Contact lists and PPM
PPM is responsible for maintaining and managing an end user’s personal information in the system.
The following contact list functionality is supported with PPM:
• retrieving contact list from PPM
• adding and deleting contacts
• updating contact information
When the IP Deskphone user adds, edits, or deletes a contact in their Address Book, a
corresponding request is sent to PPM and that information is added to the user's contact list on
PPM. PPM does not provide information about contact list size restrictions. This information is
retrieved from the device configuration file. The parameter MAX_ADDR_BOOK_ENTRIES defines
the size of the contact list and permitted number of friends.
Note:
The PPM contact list does not support a user's groups in the contact list.
Contact name, address, and designation as friend or not must be entered; otherwise, PPM
rejects the entry.
Related Links
Personal Profile Manager support on page 25
Emergency numbers
The emergency number from PPM should be included in the dialing plan and possess all properties
of that emergency number.
PPM data is located first, then data from a Dialing Plan file. Note that PPM data has priority over
data from a Dialing Plan file. If the emergency numbers in PPM and the Dialing Plan file are
identical, then the number from PPM is dialed. Emergency PPM data and Dialing Plan data from the
configuration file can work together.
Configuration
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 373
Comments? infodev@avaya.com
To Next Page
Loading...
