Avaya 1230 - Page 387

Feature / Functionality Comments
2. Configure FNEs to enable and disable EC500.
3. Configure the IP Deskphone extension for EC500
through off-pbx-telephone station-mapping.
4. Use the FAC to change the mobile number. User FNEs
to enable/disable the feature.
Ring Again 1. Configure the FAC and FNE for enabling and disabling
auto callback
2. Configure the auto-callback button in the IP
Deskphone’s Endpoint Editor.
3. Use FNEs to enable and disable the feature.
Priority Call 1. Configure the FAC and FNE for Priority Call.
2. Configure the IP Deskphone extension COS as “Priority
Calling = Y”.
3. Use the FNE to activate per-call priority calling.
Note:
An incoming priority call to Avaya Aura
®
digital phones/
96xx phones triggers distinctive ringing, but the IP
Deskphones do not provide distinctive ringing for an
incoming priority call.
Related Links
FNEs and FACs with Avaya Aura
®
on page 382
Feature configuration details
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 387
Comments? infodev@avaya.com