Avaya 1230 - Overview

Chapter 40: UNIStim IP Deskphone
migration from CS 1000 to
Avaya Aura
Related Links
IP Deskphone migration on page 392
Overview on page 393
Requirements on page 394
Before you begin on page 394
Migrating IP Deskphones with UNIStim software from CS 1000 to Avaya Aura
®
using Aura
®
Utility
Server on page 395
Overview
Note:
The use of Aura
®
Utility Server is not mandatory; any TFTP or HTTP server can be used as a
provisioning server for the file download.
It is assumed that the IP Deskphones connect to Avaya Aura
®
through TCP or TLS and that the
default embedded device certificates are used for secure connection to Aura SM and Aura Utility
Services. For more information on the default certificates, see Embedded Device Certificates on
page 378.
Note:
Avaya recommends that a single IP Deskphone of each type be migrated first to verify that the
setup is correct.
For large installations, it is not recommended that all IP Deskphones be migrated at the same
time.
This chapter does not describe how to configure CS 1000, Avaya Aura
®
, or third-party applications
such as the DHCP and TFTP servers. For this information, refer to the appropriate product
documentation.
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 393
Comments? infodev@avaya.com