3. Create a device configuration file with the configuration options required for connecting the
IP Deskphones to Avaya Aura
®
.
Prepare all other SIP-related files to configure your IP Deskphones properly, such as
licenses, images, and dial plan.
Important:
If TLS is used for secure connection to Aura
®
Session Manager, the following option must be
added to the device configuration file:
USE_DEFAULT_DEV_CERT YES
Related Links
UNIStim IP Deskphone migration from CS 1000 to Avaya Aura on page 393
Migrating IP Deskphones with UNIStim software from CS
1000 to Avaya Aura
®
using Aura
®
Utility Server
About this task
If you have IP Deskphones running UNIStim firmware on a CS 1000 system, and you want to
migrate the IP Deskphones to Avaya Aura
®
with SIP software on the IP Deskphones, use the
following procedure.
Procedure
1. Create configuration files for the IP Deskphones with UNIStim firmware, as shown in the
following example for the 1220 IP Deskphone.
Example of configuration file for 1220 IP Deskphone:
1220SIP.cfg:
[FW]
DOWNLOAD_MODE AUTO
VERSION 04.04.09.00 <— version should be taken from the SIP software file name
PROTOCOL HTTP
FILENAME SIP12x004.04.09.00.bin <— specify the SIP software file name here
2. Create provisioning files for the IP Deskphones with the following content. The following
example is for the 1220 IP Deskphone.
Example of provisioning file for 1220 IP Deskphone:
1220SIP.cfg:
[FW]
Migrating IP Deskphones with UNIStim software from CS 1000 to Avaya Aura
®
using Aura
®
Utility Server
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 395
Comments? infodev@avaya.com
To Next Page
Loading...
