3. Create a temporary folder on the hard drive of your PC. Add the software images,
provisioning files, device configuration files and other files intended for the IP Deskphones to
this folder.
Important:
Do not create any subfolders in the temporary folder.
4. Upload the folder content to the Avaya IP Office Manager.
• Run IP Office Manager and log in.
• In the IP Office Manager main window, click File > Advanced > Embedded File
Manager….
Figure 95: IP Office Manager – main window
• Select IP Office system and log in.
Migrating IP Deskphones with UNIStim firmware from CS 1000 to IP Office
404 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
