Avaya 1230 - Adding a New IP Deskphone to Avaya Aura

Appendix B: Quickstart — Add a 1200
Series IP Deskphone to Avaya
Aura
®
This appendix is a quickstart guide to adding one IP Deskphone to Avaya Aura
®
.
Related Links
Adding a new IP Deskphone to Avaya Aura
®
on page 413
Adding a new IP Deskphone to Avaya Aura
®
1. Use System Manager (SMGR) to add the new extension.
Use the same approach/steps as configuring a 96x1 SIP phone.
Use the 9600SIP_Default_CM_ template.
You do not have to configure anything in Endpoint Editor for Quickstart use.
2. Create the phone’s 12x0.cfg configuration file; for example, 1220.cfg.
Example:
[FW]
DOWNLOAD_MODE FORCED
VERSION 04.04.09.00 <— version from the firmware file name
PROTOCOL HTTP
FILENAME SIP12x004.04.09.00.bin <— SIP firmware file name
3. Create the phone’s 12x0SIP.cfg configuration file.
DEVICE_CONFIG]
DOWNLOAD_MODE FORCED
FILENAME DeviceConfig.dat <— name of the device configuration file
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 413
Comments? infodev@avaya.com