PROTOCOL HTTP
4. Create the phone’s DeviceConfig.dat device configuration file.
AVAYA_AURA_MODE_ENABLE YES
USE_DEFAULT_DEV_CERT YES
SIP_DOMAIN1 mycompany.com
SERVER_IP1_1 135.20.253.150
SERVER_TLS_PORT1_1 5061
5. Store all 3 config files (12x0.cfg, 12x0SIP.cfg, DeviceConfig.dat) on the Aura Utility Server
using IP Phone Tools > IP Phone Custom File Upload, as shown in the following figure.
Figure 104: IP Phone Tools > IP Phone Custom File Upload screen
6. Plug in the new IP Deskphone.
DHCP is the default and an IP address is obtained.
Note:
DHCP option 66 can be used to configure the Provisioning URL for large migrations.
7. Enter the Utility Server’s IP address as the IP Deskphone’s Provision URL.
a. Double-press the Services key quickly, and select Network Configuration from the
menu.
Quickstart — Add a 1200 Series IP Deskphone to Avaya Aura
®
414 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
