b. Press the Auto soft key. Un-check the Provision Server check box and press the
Config soft key.
c. In the Provision field, enter the Utility Server IP address.
Press the OK soft key and then press the Apply soft key.
Note:
Toggle the “1” key to obtain ‘:’, ‘/’ and ‘.’.
8. Reboot the IP Deskphone.
The IP Deskphone may reboot again after obtaining the config.dat file.
9. Log in with the User ID (extension number) and password.
Related Links
Quickstart — Add a 1200 Series IP Deskphone to Avaya Aura
®
on page 413
Adding a new IP Deskphone to Avaya Aura
®
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 415
Comments? infodev@avaya.com
To Next Page
Loading...
