Configuring FNEs
Configuring Feature Name Extensions (FNEs) is a two-part process.
1. Configure the FNEs in SMGR Cut Through or in Communication Manager SAT.
2. Add the FNEs as Implicit Users to the Session Manager (SM).
Configuring the FNEs
FNEs are configured on Communication Manager but can be accessed through System Manager
using the path Home > Elements > Communication Manager > Element Cut-Through.
1. Go to Communication Manager Element Cut-Through page.
2. Click the Communication Manager name, as shown in the following figure.
The Communication Manager command page opens.
3. Enter the following in the Command field:
change off-pbx-telephone feature-name-extensions
4. Click Send.
5. Input FNE numbers consistent with your dial plan and click Enter when finished.
Configuring FACs and FNEs for the IP Deskphones on Avaya Aura
®
418 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
