3. DEFAULT_SPEEDDIALLIST_FILE <Filename — file with the feature list
Note:
Key numbering ascends from bottom to top, first on the right side, then the left side of the IP
Deskphone display screen. Key 1 is reserved and cannot be used.
Key numbering example:
6 3
5 2
4 1
Deviceconfig.dat example
SPEEDLIST_KEY_INDEX 4
SPEEDLIST_LABEL Features
DEFAULT_SPEEDDIALLIST_FILE FNE_Speeddiallist.txt
Related Links
Creating a speed dial list on page 420
Creating the speed dial list file
Create the speed dial list file with speed dial data entries
Parameter Definition
[key] Speed dial key data delimiter.
Required.
label=<speed dial name> Label displayed in speed dial list.
Required.
target=<URL> FNE or FAC digits @ domain
Required.
retrieve=NO Held call retrieved when call is done.
Optional.
subject=<display msg> Message displayed when selected.
Optional.
mode=<Always|MidCall|IdleOnly> When the feature is displayed in the list.
Optional.
Example
The following is the speed dial list for the EC500 feature set.
Creating the speed dial list file
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 421
Comments? infodev@avaya.com
To Next Page
Loading...
