EasyManua.ls Logo

Avaya 1230 - Page 62

Avaya 1230
428 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
y=1 indicates the primary address and y=2 indicates the secondary address.
- port_number - the SIP proxy signaling port (default is 5060).
SERVER_TCP_PORT[x]_[y] [port_number] — This parameter configures the signaling TCP
ports for each proxy.
- x — the domain number.
- y —y – indicates whether it is the primary or secondary IP address.
y=1 indicates the primary IP address and y=2 indicates the secondary IP address.
- port_number – the SIP proxy signaling TCP port (default is 5060).
SERVER_TLS_PORT[x]_[y] [port_number] — This parameter configures the signaling TLS
ports for each proxy.
- x — the domain number.
- y — y – indicates whether it is the primary or secondary IP address.
y=1 indicates the primary IP address and y=2 indicates the secondary IP address.
- port_number – the SIP proxy signaling TLS port (default is 5061).
DNS_DOMAIN [domain] — the DNS domain of the IP Deskphone.
SIP_PING [YES | NO] — The SIP_PING configuration value is used to maintain server
heartbeat detection and to keep a firewall pinhole open.
When used for server heartbeat detection, the IP Deskphone periodically pings the SIP Proxy
and awaits a response. When three attempts to ping the SIP Proxy fail, the
IP Deskphone begins a failover process and attempts to connect to the next configured SIP
Proxy IP in the same domain.
When a NAT TRAVERSAL method is selected, the SIP_PING configuration value also helps
keep a firewall pinhole open.
Important:
Decide carefully whether SIP_PING usage is appropriate for your environment. Even when
SIP_PING is not used for NAT TRAVERSAL, it is highly likely that you must keep
SIP_PING enabled for server heartbeat detection.
If the IP Deskphone is behind a firewall, it is very likely that you must keep SIP_PING enabled,
unless an alternate method of keeping the firewall pinhole open is used.
The default value is YES if not specified in the device configuration file. If SIP_PING is
changed in the Device configuration file, the IP Deskphone must be rebooted for the change to
take effect.
- YES - enables pinging
- NO - disables pinging
Creating the provisioning files
62 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com

Table of Contents

Other manuals for Avaya 1230

Related product manuals