Avaya 1230 - Page 86

- LOG_EXPIRE — A certificate is not deleted when it expires and a security log entry is
added. Even if the certificate is not deleted, it cannot be used to authenticate a file.
- NO_EXPIRE_LOG — A certificate is not deleted when it expires and security log entry is not
added. Even if the certificate is not deleted, it cannot be used to authenticate a file.
• DWNLD_CFG_ACCEPT — defines how all TFTP configuration files are authenticated when
there are no customer certificates on the phone. The parameter does not come to effect when
a customer certificate installed. The default value of the parameter is VAL_ACCEPT Following
are the acceptable parameter values:
- VAL_ACCEPT — Unsigned and signed files are always accepted if there are no valid
customer certificates.
- VAL_MANUAL_A — If the resource file is not signed and if there are no customer
certificates, then Finger Print Display and Accept/Reject options prompt appears.
- VAL_MANUAL_B — If the resource file is not signed and if there are no customer
certificates, then enter Finger Print Value and select Accept option manually.
• DWNLD_CFG_SIGNING [YES | NO] — defines if configuration files (12xxSIP.cfg) are forced
to sign if a customer certificate installed. This parameter does not come into effect if the
customer certificates are installed. The default parameter value is no. The following are the
acceptable values for this parameter:
- NO — If there is a customer certificate installed, the downloaded file is automatically
accepted without authentication.
- YES — If there is a customer certificate installed, the downloaded file must be signed and
fully authenticated.
• PRIMARY_SERVER_PROFILE [FILENAME] — This parameter is the set of Server Profile
configuration parameters to be applied for the Primary (S1) SIP server.
- filename — the name of the Server Profile file to be applied for the Primary server; for
example, profile01.dat
• SECONDARY_SERVER_PROFILE [FILENAME] — This parameter is the set of Server Profile
configuration parameters to be applied for the Secondary (S2) SIP server.
- filename — the name of the Server Profile file to be applied for the Secondary server; for
example, profile02.dat
• TECH_SUPPORT_LABEL [label_string] — This parameter configures the label used for the
Support soft key on the licensing screen. The user can call the Technical Support service by
pressing this soft key. The default value of the label is "Support" .
— label_string - label characters. Maximum length of the string is 6 alpha-numerics characters.
Note:
The label appears if the TECH_SUPPORT_ADDRESS parameter is defined.
• TECH_SUPPORT_ADDRESS [addr_string] — This parameter configures the URI of the
Technical.Support service. If the IP Deskphone licensing verification fails, then special dialog
Creating the provisioning files
86 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com