EasyManua.ls Logo

Avaya 1230 - Page 87

Avaya 1230
428 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
appears where the IP Deskphone user can press the Support soft key to call to the Technical
Support service (see the preceding command TECH_SUPPORT_LABEL).
The default value is notset@invalid.invalid.
FAST_EARLY_MEDIA_ENABLE [YES|NO] — This parameter allows the administrator to
activate and deactivate the Fast Early Media option (according to RFC 3264).
The default value is NO.
- YES - activate the Fast Early Media option. When set to YES, SRTP is not supported.
- NO - deactivate the Fast Early Media option
ENABLE_ANSWER_MODE [YES | NO] — This parameter allows the administrator to specify
if Answer-Mode is supported when registering with the proxy. The default value is NO.
- YES - the Answer-Mode is allowed. The IP Deskphone adds the "answermode" tag to the
Support header in the REGISTER request.
- NO - the Answer-Mode is not supported (default).
ANSWER_MODE_MAXALLOWADDR [max_addr] — This parameter specifies the maximum
number of addresses that can be white-listed for Answer-Mode support.
The allowed values are from 0 to 200. The default value is 100.
— max_addr - maximum number of addresses
ANSWER_MODE_MICMUTE [YES | NO] — This parameter specifies if the microphone is
muted when a call is auto-answered by the Answer-Mode functionality.
- YES - mute the microphone
- NO - do not mute the microphone (default value)
FIPS_MODE [YES | NO] — FIPS mode is used in a Federal environment. This parameter
verifies that the IP Deskphone is in Federal Information Processing Standards (FIPS) certified
mode.
Note:
The FIPS_MODE parameter has an interaction with the IM_MODE parameter. Refer to the
IM_MODE parameter description.
PREFER_CUSTOMIZED_RBT [YES | NO] — This parameter configures the opportunity to not
stop the customized ringback tone when a 180 Ringing message is received.
- YES – after receiving a 180 Ringing message without SDP body, the media stream is not
closed and the customized ringback tone continues to play.
- NO – after receiving a 180 Ringing message without SDP body, the media stream is closed
and local ringback tone is generated (default).
Create the device configuration file
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 87
Comments? infodev@avaya.com

Table of Contents

Other manuals for Avaya 1230

Related product manuals