• RPID_PRESENCE_ENABLE [YES | NO] — This parameter configures RPID-based presence
with Avaya Presence Services. RPID is required for Avaya Presence Services. The defailt is
NO.
- YES — if Avaya Presence Services with Avaya Aura Session Manager/Communication
Manager are used .
- NO — if Avaya Presence Services with Avaya Aura Session Manager/Communication
Manager are not used (default).
• PRES_SERVER_IP <IP address of Presence Server> — This parameter is the IP address of
Avaya Presence Server. It is required if Avaya Presence Services are used.
Default value is <empty>.
• USE_DEFAULT_DEV_CERT [YES | NO] — This parameter controls the use of the default
device certificate for HTTPS/TLS connections to Avaya Aura
®
. The default value is NO. It can
be configured through the device configuration file.
- YES – Use the default device certificate if no customer device certificate is installed.
- NO – Do not use the default device certificate.
• AVAYA_AURA_MODE_ENABLE [YES | NO] — This parameter is a command that specifies if
Avaya Aura
®
-specific features are active on the IP Deskphone or not. It can be configured
through the device configuration file and through server profiles. The default value is NO.
- YES – Avaya Aura
®
-specific features are active.
- NO – Avaya Aura
®
-specific features are not active.
• CALL_ORIGIN_BUSY [YES | NO] — This parameter determines if the user is presented with
an incoming call when entering the address of an outbound call. The default is NO.
• LINE_KEY_SCROLLING [YES | NO] — This parameter defines whether scrolling for long line
key labels is enabled. The default value is NO.
- YES – scroll long line key labels
- NO – do not scroll long line key labels
• USE_CONTACT_IN_REFERTO [YES | NO] — This parameter defines which transfer target
address should be used in Refer-To header of REFER SIP request on attended transfer. The
default value is YES.
- YES – use Contact URI of the transfer target in Refer-To header of REFER SIP request
- NO – use To URI of the transfer target in Refer-To header of REFER SIP request
QoS and ToS commands
• AVAYA_AUTOMATIC_QoS [YES | NO] — provides a better treatment for signaling and media
packets after you deploy the IP Deskphones with the Avaya switches. All the devices use
Creating the provisioning files
88 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
