Avaya 1230 - Core Call Operations; Making a Call

- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
The following is an example of DIAL_TONE:
350,440;-1 (350 and 440 Hz continuous tone)
• RINGING_TONE [frequency1 | frequency2 | on_time | off_time] — used to select the tone
advising the caller that a connection is made and a calling signal is applied to a telephone
number or service point. You can select the country-specific tone. The default tone is the North
American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
The following is an example of RINGING_TONE:
440,480; 2000,4000 (440 and 480 Hz with 2 seconds on, 4 seconds off)
• BUSY_TONE [frequency1 | frequency2 | on_time | off_time] — used to select the tone
advising the caller that the telephone number is busy. You can select the country-specific tone.
The default tone is the North American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
• FASTBUSY_TONE [frequency1 | frequency2 | on_time | off_time] — used to select the
tone advising the caller that the telephone number is busy. It is fast in cadence or frequency.
You can select the country-specific tone. The default tone is the North American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
• CONGESTION_TONE [frequency1 | frequency2 | on_time | off_time] — used to select the
tone advising the caller that the groups of lines or switching equipment necessary for setting up
the required call, or for the use of a specific service, are temporarily engaged. You can select
the country-specific tone. The default tone is the North American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
Creating the provisioning files
90 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com