Figure 33: MADN SCA shared line active
Audio Codecs
This feature
allows you to specify a codec to which you can switch to during an active call. You
can use the Preferences menu to modify the order of preference of the codecs between
calls.
You can select an audio codec by name during a call, or while the handset is idle. The Audio
Codecs feature also gives you control over the audio configuration that is used for inbound
and outbound calls.
To change the codec while on the call, select Audio > Change codec, and then press OK.
The following context-sensitive soft keys are available on the Audio Codes page:
• Ok — to view the Audio Codec Selection screen.
• Back — to return to the previous screen.
Audio Codec Selection
The Audio
Codec Selection allows you to select a codec to use during inbound and outbound
calls.
The following context-sensitive soft keys are available for selecting the audio codes:
• Select: The IP Deskphone attempts to renegotiate the codec for the current call to use
the selected codec.
• Back: Allows you to return to the Audio Codec screen.
Audio Codecs
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 173
To Next Page
Loading...
