Avaya 1230 - Presence

displays. If Call Forward mode is already active, then you are prompted whether to
deactivate it.
• If you select the forward all option, then all accounts are configured in Call Forward mode
using the provided target. DND mode is deactivated for all accounts. If accounts are
already in Call Forward mode for a different target, they are updated to use the new
target.
• If you select the forward none option, the Call Forward feature is deactivated for all
accounts for which it is currently active.
After a single-account CFwd programmed key is pressed:
• If the account is already forwarding calls to the programmed target, call forwarding is
deactivated.
• If call forwarding is not already activated, then the account is configured to forward calls
to the given target, disabling DND if necessary, and overriding any other call forward
target that might be active for the account.
After a forward all programmed key is pressed:
• If all accounts are already configured to forward calls to the key's target, then Call Forward
is disabled for all accounts.
• If not, Call Forward is activated for all accounts using the key's target.
For both the single key and the all key, you can treat the key as a toggle. If no Call Forward
or DND operations are selected, pressing the key switches one or all accounts between
forwarding to the key's target and not forwarding states.
The Call Forward mode and target for each account is persistent. If you restart the IP
Deskphone or logout and login, the Call Forward state is retained.
Presence
Selecting the Presence soft key prompts you to specify which presence state of the account
should
be
modified. The option all lets you configure all accounts to the same presence in one
operation.
If you select a single account, then the current state of the account is displayed and you are
prompted whether it should be changed. You are then prompted to enter the new presence
state. The new presence state is applied after it is confirmed.
If the option is selected, no current state is displayed, and you are immediately prompted to
select the new state. The new state is then applied to all registered accounts.
When using a programmed Presence feature key, the account that is impacted by the
Presence feature key is determined after the feature key is configured.
User status
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 193