In-call context-sensitive soft keys
When a call is active, use the context-sensitive soft keys to access the menu items shown in
the following figure.
Note:
Not all the following soft keys may be displayed, depending on the configuration of your
system and your IP Deskphone.
Figure 5: In-call context-sensitive soft keys
Table 4:
Menu items accessed during an in-call session through context-sensitive soft
keys
Item Function
Conf Press the Conf soft key to obtain a dial tone to place
another call during an active call or to make a
conference call.
The Conf soft key behaves like the NewCal context-
sensitive soft key.
Trnsfr Press the Trnsfr soft
key to transfer the current call to
another location or to another contact.
Audio
Press the Audio soft key to:
1.
Change codec:
•
G722 (wideband codec)
• PCMU (standard u-law)
• G729 (729 codec)
• PCMA (standard a-law)
2. Monitor Audio Quality—used to view details
about the audio quality of an active call.
Actvat
The Actvat
soft key appears when the call is not
active. The most common usage of this key is when
the call displayed onscreen is a call that was parked
against the user (or a call that the user placed on
hold).
Introduction to the Avaya 1230 IP Deskphone
28 Avaya 1230 IP Deskphone with SIP Software User Guide November 2013
Comments? infodev@avaya.com
To Next Page
Loading...
