Avaya 1230 - Attaching the Foot Stand (Optional)

Figure 10: IP Deskphone connections
Warning:
Ensure that the protective rubber cap on the Expansion Module port is in place when the
port is
not in use. Connection of anything other than the proper Expansion Module connector
to this port can cause damage to the IP Deskphone.
Attaching the foot stand (optional)
Attach the foot stand in the appropriate slots depending on the desired angle for your Avaya
1230 IP Deskphone. If you insert the foot stand into the upper slots, your Avaya 1230 IP
Deskphone sits at a 25-degree angle.
If you insert the foot stand into the lower slots, your Avaya 1230 IP Deskphone sits at a 55-
degree angle.
1. Align the bottom tabs on the foot stand with the position 1 slots or the position 2
slots
on the back of your Avaya 1230 IP Deskphone. In position 1, the Avaya 1230
IP Deskphone sits at a 25-degree angle.
In position 2, the Avaya 1230 IP Deskphone sits at a 55-degree angle.
Installing the 1230 IP Deskphone
50 Avaya 1230 IP Deskphone with SIP Software User Guide November 2013
Comments? infodev@avaya.com