Multiuser
230
Initial login
For an initial login, you must enter a user name and password and specify
your login to either be permanent or to expire. You can also specify which
SIP domain you want to access. The Domain key allows you to select a
domain from the configured list but you cannot modify the domains. You
can change the language used at the login screen. Figure 36 on page 230
shows the primary login screen.
Figure 36: Primary Login screen
After you are logged in, the IP Deskphone displays the Idle screen. You
can configure up to five profiles. If the limit is exceeded, then the least
recently used profile is automatically deleted.
Additional logins
The Login command in the System menu allows you to register
additional accounts. You cannot change the language in a secondary
login. Figure 37 on page 231 shows the secondary login screens.
To Next Page
Loading...
