Avaya 1408 - Button Clicks; Error Tones; Ringer Volume; Handset Volume

1408, 1416, 1608 and 1616 Phone Guide Page 141
15-601040 Issue 04d (25 January 2011)IP Office
Phone Settings: Volume and Sound
18.9.1 Button Clicks
While using the phone menus, the phone can provide a key press confirmation click sound. This can be turned off if it is
annoying.
1.
Press the MENU button.
2.
Press the Select soft key.
3.
Use the up and down arrow keys to locate the option Button Clicks.
4.
Use the left and right arrow keys or press the On/Off soft key to change the setting.
5.
When completed, press the Done soft key.
6.
Press the Exit soft key to exit the menus.
18.9.2 Error Tones
1.
Press the MENU button.
2.
Press the Select soft key.
3.
Use the up and down arrow keys to locate the option Error Tone.
4.
Use the left and right arrow keys or press the On/Off soft key to change the setting.
5.
When completed, press the Done soft key.
6.
Press the Exit soft key to exit the menus.
18.9.3 Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
1.
With the phone idle or ringing, press the key.
2.
Use the + plus and – minus keys to adjust the volume.
3.
The display will return to normal after a few seconds.
18.9.4 Handset Volume
While talking via the handset, you can adjust the volume of the incoming call.
1.
With the call connected on the handset, press the key.
2.
Use the + plus and – minus keys to adjust the volume.
3.
The display will return to normal after a few seconds.
18.9.5 Headset Volume
While talking via the headset, you can adjust the volume of the incoming call.
1.
With the call connected on the headset, press the key.
2.
Use the + plus and – minus keys to adjust the volume.
3.
The display will return to normal after a few seconds.