1408, 1416, 1608 and 1616 Phone Guide Page 15
15-601040 Issue 04d (25 January 2011)IP Office
Introduction: The Phone Stand
1.7 Labels
Next to each call/line appearance button and feature button is a paper label. The label identifies the call/line appearance
number or the feature that has been programmed on the button by your system administrator. You can remove the labels
if you want to change a label or write on a blank one. Printed labels are also available for your telephone. See your system
administrator for more information.
1.8 IP Phone Features (1608 and 1616)
The 1608 and 1616 phones connect to the phone system using an IP connection and support a number of additional
features:
· The phone uses a 10/100 Ethernet connection to connect to the telephone system via the IP network.
· The phone includes a PC pass through 10/100 Ethernet port that can be used to also connect a computer to the
network through the same connection as the phone. Use of this port can be disabled by the system administrator if
not supported.
· The phone may be powered from the network if Power over Ethernet (PoE) is available. Otherwise the phone needs
its own power supply unit.
To Next Page
Loading...
