1408, 1416, 1608 and 1616 Phone Guide Page 36
15-601040 Issue 04d (25 January 2011)IP Office
2.8 Adjust the Call Volume
While talking, you can adjust the volume of the incoming call. The volume is separately adjusted for which every device
you are currently using (handset, headset or speaker).
1.
With the call connected, press the key.
2.
Use the + plus and – minus keys to adjust the volume.
3.
The display will return to normal after a few seconds.
2.9 Muting a Call
Muting a call stops the caller from hearing you. However you can still hear them.
· The mute setting remains active even if you switch between calls using hold and or appearance buttons.
· If you change how you are listening to the call, for example switching from the handset to the speaker, the mute
setting is canceled.
1.
To activate mute, press the MUTE key. The button will be lit while mute is active.
2.
To switch mute off, press the key again.
2.10 Ending Calls
· The DROP key can be used to end the current call to which you are talking. If the call is a conference call, it
displays a menu to allow selection of which conference party to drop .
· If the call is connected on the phone's speaker, the SPEAKER key is lit. Pressing the key again will end the
call.
· If the call is connected on the phone's headset, the HEADSET key is lit. Pressing the key again will end the
call.
· If the call is connected on the phone's handset, replacing the handset will end the call.
57
To Next Page
Loading...
