Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Logout.
4. You are logged out of the phone. The results depend on several factors:
• If the phone does not have a default user, or the default user is currently logged on
elsewhere, the phone displays NoUser.
• If the phone has a default user and they are not current logged on elsewhere, they are
automatically logged back in unless they are set to forced login.
• If you are the default user of another extension that is free (doesn't have anyone else
logged in to it), you are automatically logged back in to that extension unless you are set
to forced login.
Related links
Logging In/Out on page 120
Changing Your Security PIN
You can change your own security PIN (login code). This is not your voicemail code used for
voicemail access. If set, this PIN is used for logging in at other phones, locking your phone, and
accessing system administration features.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Set Security Pin.
4. Enter your current security PIN if you already have one and press Done.
5. Enter your new security PIN.
• Your system administrator can set rules for the required length of the code and to
block the use of obvious codes (1234, 1111). You cannot save a new code until those
requirements have been meet. Contact your system administrator for details of your
system’s settings if necessary.
6. Press Save.
Related links
Logging In/Out on page 120
Changing Your Security PIN
March 2023 Using 1408/1416 Phones on IP Office 123
Comments on this document? infodev@avaya.com
To Next Page
Loading...
