Procedure
1. Press the button.
2. Use the cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Audible Alerting.
4. Switch the feature on or off as required.
5. When completed, press Save or Done.
6. Press Back/Exit to exit the menus.
Related links
Ringer Controls on page 134
Switching Visual Alerting On/Off
The message waiting lamp at the top-right corner of the phone can also be used to indicate when
you have a call alerting your phone. The lamp is flashed to indicate a call waiting to be answered.
Procedure
1. Press the button.
2. Use the cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Visual Alerting.
4. Switch the feature on or off as required.
5. When completed, press Save or Done.
6. Press Back/Exit to exit the menus.
Related links
Ringer Controls on page 134
Coverage Ring
If you have any bridged appearance and or call coverage buttons, you can set the type of ringing
(coverage ring) that should be used when a call alerts on any of those buttons. The options are
to use normal ringing, a single non-repeated ring (abbreviated ring) or no ring. The coverage ring
setting is only used if you do not already have a connected call. If you already have a connected
call in progress, the shorter of the coverage ring and attention ring settings is used.
• This is a user setting which moves with you if you hot desk another phone.
Switching Visual Alerting On/Off
March 2023 Using 1408/1416 Phones on IP Office 135
Comments on this document? infodev@avaya.com
To Next Page
Loading...
