Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the cursor keys to select Coverage Ring.
4. Press the Change soft key to change the setting.
• Ring - Use normal ringing.
• Abbreviated - Use a single non-repeated ring (abbreviated ring).
• Off - No ring.
Related links
Ringer Controls on page 134
Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
Procedure
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
Related links
Ringer Controls on page 134
Internal Auto-Answer
You can select to have internal calls automatically connected if you are not already on a call.
The call is connected after the phone gives a brief tone, using either the phone's speaker or the
headset as set by the phone's audio path setting.
This function can be assigned to a feature button configured with the Auto Answer action. The
button lamp indicates when 'internal auto answer' is on. See Programmable Feature Buttons on
page 147.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
Ringer Controls
March 2023 Using 1408/1416 Phones on IP Office 136
Comments on this document? infodev@avaya.com
To Next Page
Loading...
