Avaya 1408 - Show Phone Screen; Inactivity Timer (Auto-Return)

to return the display focus to the currently connected call, the focus automatically returns to the
waiting call after a few seconds.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Show Waiting Call.
4. Change the setting as required.
5. Press Save.
Related links
Display Controls on page 138
Show Phone Screen
When this function is enabled, if you are in the menu when a call starts alerting your phone, the
phone automatically exits the menu.
Procedure
1. Press the button.
2. Use the cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Show Phone Screen.
4. Switch the feature on or off as required.
5. When completed, press Save or Done.
6. Press Back/Exit to exit the menus.
Related links
Display Controls on page 138
Inactivity Timer (Auto-Return)
You can set a timer to return the phone to its normal call display after a set period of phone
inactivity.
Note that this timer is not applied to the menu. Use Show Phone Screen on page 141.
It also does not affect the Visual Voice menu. However, the phone automatically that menu after
10 minutes if idle.
Show Phone Screen
March 2023 Using 1408/1416 Phones on IP Office 141
Comments on this document? infodev@avaya.com