Error Tones
The phone provides an error tone when you make an invalid selection. You can disable the error
tone if required.
Procedure
1. Press the button.
2. Use the cursor keys to select Screen/Sound.
3. Use the cursor keys to select Error tones.
4. When completed, press Save or Done.
5. Press Back/Exit to exit the menus.
Related links
Volume and Sound on page 143
Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
Procedure
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
Related links
Volume and Sound on page 143
Handset Volume
Whilst talking, you can adjust the volume of the incoming call. The volume is adjusted separately
for whichever device is in use (handset, headset or speaker).
Procedure
1. With the call connected, use the + plus and – minus keys to adjust the volume.
2. The display returns to normal after a few seconds.
Related links
Volume and Sound on page 143
Volume and Sound
March 2023 Using 1408/1416 Phones on IP Office 144
Comments on this document? infodev@avaya.com
To Next Page
Loading...
