The button's red lamp is lit when forwarding is enabled.
Related links
Programmable Button Features on page 148
Call Park Button
A button set to this action can be used to park and unpark calls. The button can be set with or
without a park slot number.
• When associated with a specific park slot number, the button can park and unpark a call from
that park slot. When a call has been parked in that park slot, the button's lamp flashes. Green
if the call was parked using that button, red if parked by another method. Pressing the button
again retrieves the call.
• When not associated with a specific park slot number:
- If pressed while you have a call connected, that call is parked using a park slot number
assigned by the system based on your extension number.
- If pressed while you have no call connected, your phone displays details of your parked
calls and allow you to unpark a selected call.
- When you have calls that you parked (other than Park & Page) or others parked against
your extension, the button's lamp flashes.
Related links
Programmable Button Features on page 148
Call Park to Other Button
A button set with this action can be used to park a call against another extension. The park slot
number used is based on your extension number.
The button can be set with a target user number or left blank for number entry when the button
is pressed. The button's red lamp is lit when a call is parked. The button can be pressed again to
retrieve the call.
Related links
Programmable Button Features on page 148
Call Pickup Button
Answer a call ringing a user or hunt group.
The target user or group number from which to pickup a call can be set when the button is
configured. If no number is set, pressing the button displays a menu for number entry.
Related links
Programmable Button Features on page 148
Programmable Feature Buttons
March 2023 Using 1408/1416 Phones on IP Office 150
Comments on this document? infodev@avaya.com
To Next Page
Loading...
